冷床設備廠服務為先“本信息長期有效”

冷床主要有拔齒式冷床、齒條步進式冷床、撥爪式冷床、運載鏈式冷床、滾盤式冷床等。

將已軋制成型產品通過輥道輸送進入冷床，再由齒條步進式拔齒等形式，將排列在冷床上的工件逐步移向冷床頂端，達到了工件的冷卻效果。

The main bed tooth pulling type cooling bed, rack step type cooling bed, poking claw type cooling bed, carrier chain cooling bed, rolling disc cooling bed etc..

The rolling molding products through the conveyor into the rack cooling bed, stepping teeth and other forms, will be arranged in workpiece cooling bed is gradually moved to the top of the bed, the cooling effect of the workpiece.

矯直板位于冷床入口側, 由制動裙板拔入的軋制棒材首先落到矯直板上, 使棒材保持大平直度。矯直板每塊長1. 15m, 寬250mm , 上有10個齒形, 塊與塊之間只留出動齒條移動間隙, 安裝在定支架上。

The straightening plate is located on the inlet side of the cooling bed, and the rolled bar pulled by the brake apron first falls on the straightening plate to maintain the maximum flatness of the bar. The straightening plate is 1. 15m long and 10 250mm wide. There is only a movable clearance between the block and block, which is installed on the fixed support.

潛行裝置有兩種形式：一種是杠桿式，另一種是滑塊式。帶潛行裝置的拉鋼式冷床很大優(yōu)點足冷床床面利用率可達60%，可以自由地儲存軋件，機動性能較好。

There are two forms of stealth device: one is lever type, the other is slider type. The biggest advantage of the pull steel cooling bed with stealth device is that the utilization rate of the cold bed can reach 60%, so that the rolling parts can be stored freely and the maneuverability is better.