冷床廠家高性價比的選擇 圣霖國際誠實守信

冷床是中小型棒材車間不可缺少的輔助設備之一。它的功能是將軋機軋制后經飛剪剪切成倍尺長度的棒材, 輸送并卸到冷床齒條上冷卻, 使其溫度由900℃降至100 ～ 300℃。

The cooling bed is one of the auxiliary equipment in the small bar workshop indispensable. It is the function of the bar rolling mill after double length flying shear, conveying and discharging to the cooling bed rack, the temperature 900 DEG C to 100~300 C.

由冷床入口輥道及升降擋板、橫移小車、分鋼裝置、步進齒條冷床、編成組的圓鋼，通過橫移小車移送到冷床分鋼裝置，動齒條每步進一個周期，分鋼裝置就撥一根鋼到靜齒條上，使成組的圓鋼逐根分配到每一個齒內，由于上冷床的圓鋼溫度很高。

It cists of cooling bed and lifting baffle, roller, steel traversing trolley device, stepping into the steel group, rack cooling bed, transferred to the steel cooling bed device by traversing trolley, moving rack each into a cycle of steel means a steel dial to static rack, the circular steel group one by one assigned to each tooth, because of high temperature steel cooling bed.

為適應不同型號、不同厚度的角鋼，防傾翻裝置的上有一個可以隨時取放配重的斗殼，這樣就可以實現不同型號、不同厚度角鋼在裙板處穩定下滑。

In order to adapt to different types and different thickness of angle steel, the andumping device has a  shell that can be taken and counterweight at any time, so  different type and thickness angle steel can slide steadily at the skirt plate.

明確軸向位置，加大矯直壓力。不要單獨打8輥軸向，調整側彎時應以每相臨的3個輥為一個調整單元，保證矯直穩定性。側壁斜度的處理措施是經常注意檢查各輥軸向位置，竄動情況。拉鋼式和往復多爪推齒式兩種冷床對于圓鋼都不太適用，容易拉斜、滾亂。注意在不同間隙情況下，矯直力的選取。對H2與H3的測量做到每批抽查，以做到及時調整。

The axial  is clearly defined and the straightening pressure is increased. Do not play the 8 roll axis alone. When adjusting the side bend, 3 rolls per phase should be used as an adjustment unit to ensure the straightening stability. The treatment of side wall slope is to check the axial  and movement of each roll. Pay attention to the selection of maximum straightening force under different clearance conditi. The measurement of H2 and H3 is done in each batch, so as to adjust it in time.