reducer采購品牌企業 圣霖國際客戶至上

齒輪減速機具有體積小，傳遞扭矩大的特點。齒輪減速機在模塊組合體系基礎上設計制造，有的電機組合、安裝形式和結構方案，傳動比分級細密，滿足不同的使用工況，實現機電一體化。

Gear reducer has the characteristics of small volume and large torque transmission. Gear reducer is designed and manufactured on the basis of modular combination system. There are very many motor combinati, installation forms and structural schemes. The transmission ratio is fine and classified to meet working conditi and achieve mechanical and electrical integration.

在減速機家族中，行星減速機以其體積小，減速范圍廣，精度高等諸多有點，而被應用于伺服、步進、直流等傳動系統中。其作用就是在保證精密傳動下，主要被用來降低轉速增大扭矩和降低負載/電機的轉動慣量比。

In reducer family, planetary reducer is applied to servo, step and DC transmission systems because of its small volume, wide range of deceleration and high accuracy. Its role is to ensure the precision drive, mainly used to reduce the rotational speed to increase the torque and reduce the load / motor inertia ratio.

旋緊緊力螺栓。所有緊力螺栓均需用力矩板手按標明的固定扭力矩數據進行固定和檢查。減速機與機械設備間的正確安裝類同減速機與驅動電機間的正確安裝。關鍵是要必須保證減速機輸出軸與所驅動部分軸同心度一致。

Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is cistent with the of the drive shaft.