減速機生產廠家誠信企業,圣霖國際優質服務

減速機是國民經濟諸多領域的機械傳動裝置，行業涉及的產品類別包括了各類齒輪減速機、行星齒輪減速機及蝸桿減速機，也包括了各種專用傳動裝置，如增速裝置、調速裝置、以及包括柔性傳動裝置在內的各類復合傳動裝置等。

The reducer is a mechanical drive device in many fields of national economy, industry related product categories include all kinds of gear reducer, planetary gear reducer and the worm reducer, also includes a variety of special transmission device, such as accelerating device, device, and a flexible transmission device, transmission device, including various types of composite.

在安裝時，嚴禁用鐵錘等擊打，防止軸向力或徑向力過大損壞軸承或齒輪。一定要將安裝螺栓旋緊之后再旋緊緊力螺栓。

At the time of installation, it is strictly prohibited to use a hammer, such as a hammer, so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.

反力矩支架的安裝：反力矩支架應安裝在減速機朝向的工作機的那一側，以減小附加在工作機軸上的彎矩。 反力矩支架與固定支承聯接端的軸套使用橡膠等彈性體，以防止發生撓曲并吸收所產生的轉矩波動.

Reverse torque support installation: the reverse torque bracket should be installed on the side of the working machine facing the reducer in order to reduce the additional bending moment on the working shaft. The rubber and other elastomers are used in the shaft sleeve of the reverse torque bracket and the fixed support junction to prevent the flexure and absorption of the torque ripple.

允許輸入法蘭：

不能大于或小于臨級減速機的標準尺寸，如減速機PLE80?的標準法蘭為80mm,其臨級的減速級是PLE60?和PLE120，PLE80?允許法蘭不應小于60mm,也不能大于120mm。

Allow input flange

It can't be greater than or less than the standard  of the reducer. For example, the standard flange of reducer PLE80 is 80mm, and the deceleration stage of its reducer is PLE60?對于減速機的分類，細化開來，有擺線針輪減速機，行星齒輪減速機和蝸輪蝸桿減速機等。 PLE120, PLE80? The maximum allowable flange should not be less than 60mm, nor greater than 120mm.