盤錦220rolling mill歡迎來電

軋件通過冷床下的強制噴水霧化，提高了冷卻效果；通過開／關冷卻水管和采用水壓控制，冷卻速度能夠得到調節。

所有的軋件均被送到冷床上的固定位置，由移鋼機構將軋件從步進梁上翻出并移至冷床的輸出輥道上。

The water under the bed by forced atomization, the cooling effect is improved; through the opening or closing of cooling water pipe and the hydraulic pressure, the cooling speed can be adjusted.  

All of the workpiece were sent to a fixed on the cooling bed, a steel moving mechanism takes the output from the roller walking beam pulls out and moved to the bed on.

機架是軋鋼機的主要部件，它在軋鋼過程中承擔金屬變形給予的負荷。因此要求機架有足夠的強度和剛度，以保證設備安全和產品質量。型鋼軋機的機架形式較多，常見的機架形式有開口式機架、閉口式機架和半閉口式機架3種。

The frame is the main component of the rolling mill, which bears the load given by the metal deformation during the rolling process. Therefore, the frame is required to have sufficient strength and stiffness to ensure the safety of the equipment and the quality of the product. There are more frame forms of the steel mill. There are 3 kinds of common frame forms: open frame, closed frame and half closed frame.

據說在14世紀歐洲就有軋機，但有記載的是1480年意大利人達·芬奇（Leonardo da Vinci）設計出軋機的草圖。1553年法國人布律列爾(Brulier)軋制出金和銀板材,用以制造錢幣。此后在西班牙、比利時和英國相繼出現軋機。

It is said that there are rolling mills in Europe in the fourteenth Century, but it is recorded that in 1480, Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate, used in the manufacture of coins. Since then, rolling mills have been rolled out in Spain, Belgium and Britain.