圣霖軋輥歡迎來電,圣霖國際誠實守信

冷軋板帶軋輥的輥身呈微凸，當它受力彎曲時可保證良好扳形；型鋼軋機軋輥的輥身上有軋槽，根據型鋼軋制工藝要求，安排孔型。鋼管軋制中采用斜軋?jiān)碥堉频能堓佊袌A錐形、腰鼓形或盤形。

The roll body of the cold rolled strip roller is slightly convex. When it is bent by force, it can ensure good shape. There are grooves on the roller body of the section mill roll, and the pass is arranged according to the rolling requirements of section steel. The rollers of skew rolling rolling rolling principle of conical drum or disc.

當軋制其它型材時，可以用水平機架更換機架。水平機架的軋輥有很深的孔型，而機架沒有。  

較大直徑的水平軋輥確定型鋼的的形狀，而較小直徑的一對立輥用于軋制邊部。當坯料穿過傳統機架和機架精軋軋輥時，可以獲得很好的表面光潔度和尺寸公差。  

When rolling other profiles, the universal rack can be replaced with a horizontal rack. The roll of the horizontal frame has a very deep pass, but the universal rack does not.

Horizontal rolls with larger diameters determine the shape of the section steel, and a pair of rolls with smaller diameters are used for rolling edges. Good surface finish and dimensional tolerance can be obtained when the blank passes through the conventional stand and universal stand finish rolls.

被軋制的鋼種  

被軋制的鋼種是選擇軋輥的關鍵因素，其抗變形能力隨坯料化學成分不同而改變，主要表現在軋制的各階段變形的負荷大小和變化。必須根據確定的強度和硬度選擇軋輥。  

Rolled steel

The rolled steel is the key factor to select the roll. Its deformation resistance varies with the chemical  of the billet. It is mainly manifested in the load and change of deformation in each rolling stage. The roll must be selected according to the determined strength and hardness.