冷拉生產服務介紹

拉鋼式冷床，其特點是利用單爪繩式或鏈式拉鋼機，橫向成批拖運軋件。這種拉鋼機往往配備有潛行裝置，以達到有選擇性地拖運某一根（束）軋件的目的。潛行裝置有兩種形式：一種是杠桿式，另一種是滑塊式。

Pulling type cooling bed is characterized by single rope or chain machine, horizontal rolling batch haulage. This kind of steel are often equipped with stealth device to selectively hauling a workpiece to root (beam). There are two forms of the lurking device: one is leveraged, the other is a slider.

側壁斜度超差產生的原因為：

（1）輥型不正；壓力過大，型鋼與矯直輥間隙過小。

（2）輥子磨損、矯直機軸竄動過大，液壓螺母沒有鎖緊或者止推軸承磨損過大都會引起側壁斜度超差。

The reas for the deviation of the side wall slope are:

(1) the roll type is not correct; the pressure is too large and the gap between the type steel and the straightening roller is too small.

(2) the roller wears, the straightening machine shaft moves too big, the hydraulic nut is not locked or the thrust bearing wear too much will cause the side wall slope to exceed the difference.

處理后的線材強度可以等于或大于鉛浴淬火者的強度，這是其他各種線材軋后控冷索氏體化處理方法所不及的。其他優點是冷卻溫度比較均勻，溫差不大于5～10℃，而且不具有粘著性，不會像鉛浴或鹽浴處理時出現掛鉛、掛鹽現象。

The strength of the treated wire can be equal to or greater than that of the lead bath quenched. This not enough for all kinds of wire rod after cooling suxhnite treatment. Other advantages are that the cooling temperature is more uniform, the temperature difference is not more than 5~10 degrees C, and it does not have the adhesion, and it will not appear as lead or salt hanging during the lead bath or salt bath treatment.