營口fastener價格信息推薦“本信息長期有效”

簡單來說鈑金件是金屬薄板殼體，沖壓件就是用拉伸機或沖床等加工的工件1，鈑金件在折彎過程中厚度不會有變化，但在汽

車鈑金殼體中應為敲擊等原因，一部分表面會有一定變化。沖壓廠是不能確定落料尺寸的，應該是在定做模具時由模具廠試定出來的。

In a simple way, the sheet metal part is a metal sheet shell, and the stamping part is 1 of the workpiece, which is processed by a drawing machine or a punch press. The thickness of the sheet metal parts will not change during the bending process, but in the steam.

The surface of the automobile shell should be knocked and so on. Part of the surface will change. The stamping plant is unable to determine the blanking size. It should be determined by the mold factory when making the mould.

增設強壓功能。即對卸料鑲塊壓料部加厚尺寸(正常的卸料鑲塊厚H 0.03mm)，以增加對凹模側材料的壓力，從而抑制沖切時沖壓件產生翻料、扭曲變形。

Additional pressure function. In order to increase the pressure on the material of the die side, the pressure of the material in the die side is increased by the thickness of the material of the unloaded insert (normal unloaded insert thickness H 0.03mm), so as to suppress the turning and distortion of the stamping parts.

日常模具生產中，應注意維護沖切凸、凹模刃口的鋒利度。當沖切刃口磨損時，材料所受拉應力將增大，從而沖壓件產生翻料、扭曲的趨向加大。

In daily mold production, attention should be paid to sharpness of punching and concave die edges. When the cutting edge is worn, the tensile stress of the material will increase, and the stamping and bending will increase.