您好，歡迎來到易龍商務網！
發布時間：2020-11-17 07:49
【廣告】
加熱質量好。加熱時介質出爐溫度需符合工藝要求，防止局部過熱出現結焦、結炭或危險。
燃料消耗低。站場用加熱爐的能量消耗有10～15％消耗于爐子上，節省的燃料對降低單位成本和節約能源都有重要意義。
The quality of heating is good. The heating temperature of the medium should meet the requirements of the process, preventing the local overheating from coking, carbon or explosion.
Fuel cumption is low. The energy cumption of the reheating furnace in the station is 10 ~ 15% on the furnace. The fuel saving is of great significance to reducing unit cost and saving energy.
燃料氣的流動速度 燃料氣的流動速度與火焰的長短有密切關系，在外混式燃燒器中，燃料氣流速過大，會引起脫火；在半預混燃燒器中，燃料氣流速過小會引起回火。
There is a close relatihip between the flow velocity and flow velocity of flame fuel gas fuel gas in the length of the outer mixing burner, fuel gas flow rate is too large, will cause the removal of fire; in the semi premixed burner, fuel gas flow rate is too small will cause tempering.
蓄熱式加熱爐的輻射傳熱：輻射傳熱是物體熱射線的傳播過程，溫度越高，輻射能量越大，此種傳熱存在于爐氣對爐壁、爐氣和爐壁對鋼坯表面。
Radiation heat transfer of regenerative reheating furnace: radiation heat transfer is the propagation process of heat radiation of the object, the higher the temperature, the greater the radiation energy, the heat transfer exists in the furnace wall, furnace gas and furnace wall to the surface of the steel billet.
