軋輥設備生產信息推薦【圣霖國際】

硬質合金輥環廣泛應用于高速線材軋機的精軋機架，以及部分高速線材軋機的預精軋機架和棒材軋機的精軋機架。硬質合金軋輥的優點是硬度高、耐磨性好，單槽軋鋼量可以達到高速鋼軋輥的兩倍。

The cemented carbide roller ring is widely applied to the finishing mill housing of high-speed wire rod mill, as well as the finishing mill for some high speed wire rod mill and the pre finishing mill and bar mill. The biggest advantage of the hard alloy roll is high hardness and good wear resistance, and the amount of single groove rolled steel can reach two times of the high speed steel roll.

軋機上使金屬產生連續塑性變形的主要工作部件和工具。軋輥主要由輥身、輥頸和軸頭3部分組成。

輥身是實際參與軋制金屬的軋輥中間部分。它具有光滑的圓柱形或帶軋槽的表面。輥頸安裝在軸承中，并通過軸承座和壓下裝置把軋制力傳給機架。

The roller body is the middle part of the roll that actually takes part in rolling the metal. It has a smooth cylinder or a surface with a groove. The roller neck is installed in the bearing and passes the rolling force to the rack through the bearing seat and the press down device. .

被軋制的鋼種  

被軋制的鋼種是選擇軋輥的關鍵因素，其抗變形能力隨坯料化學成分不同而改變，主要表現在軋制的各階段變形的負荷大小和變化。必須根據確定的強度和硬度選擇軋輥。  

Rolled steel

The rolled steel is the key factor to select the roll. Its deformation resistance varies with the chemical  of the billet. It is mainly manifested in the load and change of deformation in each rolling stage. The roll must be selected according to the determined strength and hardness.