圣霖國際聯接機價格優選商家「多圖」

花鍵聯接由內花鍵和外花鍵組成。內、外花鍵均為多齒零件，在內圓柱表面上的花鍵為內花鍵，在外圓柱表面上的花鍵為外花鍵。顯然，花鍵聯接是平鍵聯接在數目上的發展。

The connection of the spline is made up of the inner and outer spline. The inner and outer spline are multi tooth parts, and the spline on the surface of the inner cylinder is the inner spline, and the spline on the outer cylindrical surface is the outer spline. It is  that the spline connection is the development of the number of flat bond connecti.

型面聯接：是利用非圓剖面的軸與相應形狀的零件的轂孔配合而構成的聯接，作為機械傳動中的聯接方式，型面聯接相對于傳統的鍵聯接相比，具有聯接強度高，沒有應力集中，可以傳遞大扭矩且的同時也可以承受沖擊載荷，并且對于一些大型機械裝備來講其拆裝方便及維修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection, as the connection mode in mechanical transmission, compared with the traditional linkage type surface connection compared with connecting strength, no stress , can  large torque and high efficiency at the same time it can withstand the impact load, and for some large mechanical equipment for its disassembly and convenient maintenance.

機用虎鉗結構缺點及使用中的隱患。機用虎鉗有結構簡單、夾緊力大、操作和維護方便等特點。但由于其必須具有廣泛的適用性和操作的便捷性，其螺母與絲桿之間、活動座與虎鉗體之間存在著較大的配合間隙，導致在裝夾一些加工精度要求較高的產品時難以達到要求。

The structural shortcomings of the machine vise and the hidden danger in the use. The machine tool has the characteristics of simple structure, large clamping force, easy operation and maintenance. But because of its wide applicability and convenient operation, there is a large gap between the nut and the screw rod, the movable seat and the vice body, which results in the difficulty of meeting some requirements when clamping some products with high machining accuracy.

裝夾后產品靠近活動鉗口附近容易上翹、抬起，多次裝夾一致性差。傳統機用虎鉗的螺旋副間隙較大，在使用中會產生較大振幅的振動；而活動座和虎鉗體之間的滑動接觸面較大，采用的間隙也較大。

After the clamping, the product is easy to  and lifted near the movable jaw, and the cistency of the clamping is poor many times. The spiral pair clearance of traditional machine vice is bigger, which will cause large amplitude vibration in use. The sliding contact between movable seat and jaw vice body is larger, and the gap used is bigger.