圣霖冷床優惠報價“本信息長期有效”

冷床是冶金軋鋼行業對軋制產品（螺紋鋼、園鋼、鋼管等）有效進行冷卻的工作臺面。冷床由機械傳動系統、水冷卻系統、冷床工作臺面、固定支架等方面組成。冷床主要有拔齒式冷床、齒條步進式冷床、撥爪式冷床、運載鏈式冷床、滾盤式冷床等。

The cooling bed is metallurgical industry of rolled products (steel, steel, steel and other garden) effectively cooling the work surface. The cooling bed by mechanical transmission system, water cooling system, cooling bed table, etc. of fixed bracket. The main bed tooth pulling type cooling bed, rack step type cooling bed, poking claw type cooling bed, carrier chain cooling bed, rolling disc cooling bed etc.

針對角鋼試生產初期冷床下鋼發生傾翻的特點及原因，作業區技術人員指導崗位自己設計制作了防止角鋼傾翻裝置，通過冷床長度的測量及冷床裙板至冷床齒條距離，選定防止角鋼傾翻裝置的位置及長度，利用裝置自身重力，從而實現角鋼的穩定下鋼，順利進入冷床。

The needle angle steel trial production of steel bed early occurrence characteristics and causes of the tilting of the work area, the guidance of technical staff  their own design to prevent angle tilting device, by measuring the cooling bed length and bed apron and bed rack distance, the selected angle to prevent tipping device  and length of use of the device's own gravity in order to achieve the stability of angle steel, smoothly into bed.

中型軋鋼車間生產的各種鋼材，經軋鋼機軋制后由熱鋸機（或剪切機），切成定尺長度，還需要冷卻到常溫，再進行矯直。軋制后的熱軋件冷卻時，由于連續生產，一般都是在緩慢的橫向移動過程中逐漸冷卻的。這種使軋件橫向移動并冷卻的設備，叫做冷床。

All kinds of steel produced in medium rolling mill are cut by hot saw (or shearing machine) after rolling mill, and it is cut into length of fixed length. It also needs to be cooled to normal temperature and then straightened. After rolling, the hot rolled parts are cooled down gradually because of continuous production. The equipment for rolling and cooling the workpiece is called cold bed.