鞍山reducer企業優惠報價【圣霖國際】

我國減速機行業發展歷史已有近40年，在國民經濟及工業的各個領域，減速機產品都有著廣泛的應用。在運轉200~300小時后，應進行換油，在以后的使用中應定期檢查油的質量，對于混入雜質或變質的油須及時更換。食品輕工、電力機械、建筑機械、冶金機械、水泥機械、環保機械、電子電器、筑路機械、水利機械、化工機械、礦山機械、輸送機械、建材機械、橡膠機械、石油機械等行業領域對減速機產品都有旺盛的需求。

China's speed reducer industry has been developing for nearly 40 years. In all fields of national economy and national defense industry, the reducer has a wide range of applicati. Food industry, electrical machinery, ctruction machinery, metallurgical machinery, cement machinery, environmental protection machinery, electronic appliances, ctruction machinery, hydraulic machinery, chemical machinery, mining machinery, transportation machinery, building materials machinery, rubber machinery, petroleum machinery and other industries on the reducer products have strong demand.

減速機性能特點

1,產品采用模塊化設計,電動機輸入,輸入軸和孔類型三個方面,并配置腳,法蘭安裝,適用于各種有效的減變速傳動,可以直接取代無級調速,擺線。  

2、能源消耗低、噪音低、振動小,減速機達96%。  

3,使用特殊的寬帶寬壓力電動機,當加載在20 hz - 60赫茲頻率范圍內正常使用。  

4、齒輪滲碳淬火熱處理工藝,采用獨特的低噪聲齒齒形設計,確保產品的使用壽命。  

Performance characteristics of reducer

1, the product adopts modular design, motor input, input shaft and hole type three aspects, and equipped with feet, flange installation, suitable for all kinds of effective variable speed transmission, which can directly replace stepless speed regulation and cycloidal.

2, the energy cumption is low, the noise is low, the vibration is small, and the efficiency of the reducer is up to 96%.

3, the use of a special wide band wide pressure motor when loaded in the range of 20 Hz - 60 Hz is normally used.

4, gear carburizing and quenching heat treatment process, using a unique low noise tooth profile design to ensure the service life of the product.

降低減速機運轉時的齒輪傳動噪聲已成為行業內的重要研究課題，國內外不少學者都把齒輪傳動中輪齒嚙合剛度的變化看成是齒輪動載、振動和噪聲的主要因素。用修形的方法，使其動載荷及速度波動減至小，以達到降低噪聲的目的。Thesizeofthenumberofteethofthegearratio,thetransmissionratiois。這種方法在實踐中證明是一種較有效的方法。

Reducing the gear transmission noise of the reducer has become  research topic in the industry. Many scholars both at home and abroad regard the change of gear tooth meshing stiffness as the main factor of gear dynamic load, vibration and noise. The method of modification is used to minimize the dynamic load and speed fluctuation in order to reduce noise. This method is proved to be a more effective method in practice.

減速機內部齒面硬度 隨著齒輪硬齒面技術的發展，其承載能力大、體積小、重量輕、傳動精度高等特點使其應用領域日趨廣泛。但為獲得硬齒面采用的滲碳淬硬使齒輪產生變形，導致齒 輪傳動噪聲增大，壽命縮短。

With the development of hard tooth surface technology, the internal hardness of gear reducer has been widely used because of its large bearing capacity, small volume, light weight and high transmission accuracy. But the carburizing and hardening used to obtain the hard tooth surface causes the deformation of the gear, which results in the increase of the noise of the gear transmission and the shortening of the service life.