聯接機廠家直銷值得信賴【圣霖國際】

切向鍵聯接：它由兩個普通楔鍵組成。其上下兩面（窄面）為工作面，其中之一面在通過軸心線的平面內。工作面上的壓力沿軸的切線方向作用，能傳遞很大的轉矩。

Tangent key join: it cists of two common wedges. Both sides of the upper and lower sides (narrow surface) are working faces, one of which is in the plane of the axis of the axis. The pressure on the working face acts along the direction of the shaft and transmit a large torque.

機用虎鉗的結構及原理。機用虎鉗是機械加工中常用的裝夾機構，其結構如圖1所示。其主要工作原理：轉動方頭帶動絲杠，在螺母（通過緊固螺釘固定在虎鉗體上）的作用下，做螺旋運動的絲杠帶動與之聯接的活動座沿絲杠軸線方向來回移動。

The structure and principle of machine vise. Machine vise is a common clamping mechanism in mechanical processing. Its structure is shown in Figure 1. The main principle: rotation of the lead screw nut in the square, (fixed in the vise body through a fastening screw) under the action of moving spirally driven screw connected with the movable seat to move back and forth along the screw axis.

裝夾過程及工作原理。鉗臺底座在設備工作臺上固定好后，先調整可調鉗口座在鉗體底座上的位置，確保裝夾行程內能有效對工件進行裝夾；再將待加工產品置于柔性虎鉗的兩個鉗口之間。

Clamping process and working principle. When the clamping platform is fixed on the equipment worktable, the  of the adjustable jaw seat on the base of the clamp body is adjusted first, so as to ensure that the workpiece can be clamped effectively in the clamping stroke, and then the processed product is placed between the two jaw openings of the flexible vice.