320軋機生產廠家品牌企業“本信息長期有效”

保持工作輥的上輥和下輥相對于軋機中心線對稱且在軸線方向上移動。這種的工作輥移動的設計，是用來改變工作輥和支撐輥的偏移需要大的移動量。這種大移動量的采用需要大量的改裝費用，并且需要解決很多問題.

The upper and lower rolls of the work roll are symmetrical and move in the direction of the axis of the rolling mill. The movement of this work roll is designed to change the shift of work rolls and support rolls to require large amounts of movement. The use of this large shift of momentum requires a lot of modification costs, and many problems need to be solved.

開坯機為兩輥水平軋機，坯料送至軋機前后，根據軋制程序表進入相應的軋槽可逆軋制，并通過翻鋼裝置將軋件夾緊進行翻轉。一般軋制5-7道次(多9道次)。

The blooming machine is a two roll horizontal mill, and the billet is sent to the front and rear mills. According to the rolling schedule, the roll is rolled into the corresponding rolling groove, and the workpiece is clamped and turned through the turning device. The general rolling is 5-7 times (up to 9 times).

開口式機架由機架底座和上橫梁組成。

開口式機架是型鋼車間常見的一種機架形式。這種機架的優點是制造簡單，裝卸、換輥方便。其缺點是強度和剛度較低，軋輥輥跳值較大，影響產品精度，故只適用于大型軋機。

The open frame is of the frame base and the upper cross beam.  

The open frame is one of the most common forms in the steel workshop. The advantages of this frame are simple manufacturing, loading and unloading, and convenient for roll change. Its disadvantage is that its strength and stiffness are low, the roll roll value is larger and the precision of the product is affected, so it is only suitable for large rolling mill.

使用熱軋的第二個優點就在于其可以適當?shù)母纳平饘僖约昂辖鸩牧系募庸すに囆阅堋Ｒ簿褪钦f(shuō)，其可以把較大的晶粒進行破碎，同時可以減少裂紋的出現，這樣一來，也就相當于減少了鑄造過程中的缺陷問題，提高合金的加工性能。

The second advantage of hot rolling is that it can appropriately improve the processing performance of metal and alloy materials. That is to say, it can break the larger grain and reduce the appearance of the crack, which is equivalent to reducing the defects in the casting process and improving the processing performance of the alloy.